Home
Latest images
Register
Log in
The new Sverdlovsk State Academic Philharmonic Hall in Ekaterinburg currently being planned, with the design penned by London-based Zaha Hadid Architects
/20180926_0_3.jpg)
/20180926_0_4.jpg)
+31
Sprut-B
Dr.Snufflebug
lancelot
caveat emptor
magnumcromagnon
Arkanghelsk
limb
franco
x_54_u43
flamming_python
Russian_Patriot_
Backman
ALAMO
Scorpius
Tingsay
calripson
owais.usmani
par far
PhSt
GarryB
PapaDragon
Hole
miketheterrible
AlfaT8
kvs
Svyatoslavich
sepheronx
whir
Maximmmm
Firebird
George1
35 posters
Russian Towns, Cities / Urban Development
flamming_python- Posts : 8321
Points : 8397
Join date : 2012-01-30
GarryB, xeno, magnumcromagnon and Russian_Patriot_ like this post
PapaDragon- Posts : 12790
Points : 12848
Join date : 2015-04-26
Location : Fort Evil, Serbia
flamming_python wrote:The new Sverdlovsk State Academic Philharmonic Hall in Ekaterinburg currently being planned, with the design penned by London-based Zaha Hadid Architects
I will be in this very hall where young Anakin Skywalker will hear the tragedy of Darth Plageus the Wise
Hole, Russian_Patriot_ and Lennox like this post
flamming_python- Posts : 8321
Points : 8397
Join date : 2012-01-30
The new Kaliningrad Opera & Ballet Theater, which will house a branch of the Bolshoi Theater. Designed by Norweigian architectural firm Snøhetta, and approved for construction
GarryB and Russian_Patriot_ like this post
flamming_python- Posts : 8321
Points : 8397
Join date : 2012-01-30
Vladivostok Cultural Complex, approved and with preparation work underway. Designed by New York-based Asymptote Architecture
Will house a branch of the Tretyakov Gallery, a branch of the State Hermitage, a branch of the Marinsky Theatre and a school of musical and theater arts.
Will house a branch of the Tretyakov Gallery, a branch of the State Hermitage, a branch of the Marinsky Theatre and a school of musical and theater arts.
xeno, magnumcromagnon and Russian_Patriot_ like this post
flamming_python- Posts : 8321
Points : 8397
Join date : 2012-01-30
New branch of the Tretyakov Gallery planned in Kaliningrad, by Russian architectural studio Meganom
Will be situated next to the new Kaliningrad Opera & Ballet Theater posted earlier
Will be situated next to the new Kaliningrad Opera & Ballet Theater posted earlier
LMFS and Russian_Patriot_ like this post
flamming_python- Posts : 8321
Points : 8397
Join date : 2012-01-30
The planned "Tchaikovsky Universe" Musical-Concert Complex in the town of Klin (north-west of Moscow)
The main building hosts a large theater hall, smaller philharmonic hall, repetition halls, a kid's centre and a library
Another building houses a hotel
Tchaikovsky's former country home across the road, which functions as his museum and will also be reconstructed
And a landscaped park and surrounding area, including an outdoor amphitheater
The main building hosts a large theater hall, smaller philharmonic hall, repetition halls, a kid's centre and a library
Another building houses a hotel
Tchaikovsky's former country home across the road, which functions as his museum and will also be reconstructed
And a landscaped park and surrounding area, including an outdoor amphitheater
xeno, magnumcromagnon, x_54_u43 and Russian_Patriot_ like this post
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
Old Maidan Park in Yelabuga before and after reconstruction.
Maidan is a square in Tatar
Maidan is a square in Tatar
par far likes this post
flamming_python- Posts : 8321
Points : 8397
Join date : 2012-01-30
Reconstruction of Concert Hall 'Jupiter' in Nizhny Novogorod
Before:
After:
Before:
After:
xeno and Russian_Patriot_ like this post
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
The project of a new bicycle-pedestrian embankment in Moscow along the Yauza River between Leonovskaya Grove and Sviblovo
Tingsay likes this post
flamming_python- Posts : 8321
Points : 8397
Join date : 2012-01-30
The 'New Murmansk' project planned in Murmansk, at the site of the former shipyard. Drawn up by the Russian urban planning firm Strelka KB
Will include a bridge with an indoor thematic park linking the bus terminal and railway station to the seaside embankment and ferry terminal, a museum of the Arctic, a food plaza, hotel, conference buildings, offices and apartments
Will include a bridge with an indoor thematic park linking the bus terminal and railway station to the seaside embankment and ferry terminal, a museum of the Arctic, a food plaza, hotel, conference buildings, offices and apartments
xeno, PapaDragon, Hole and Russian_Patriot_ like this post
flamming_python- Posts : 8321
Points : 8397
Join date : 2012-01-30
Some other urban beautification projects planned for the Murmansk region
Urban park in Kirovsk
Ecopark in the town of Kovdor
Public square and pond in the town of Snezhnogorsk
Embankment in the town of Kandalaksha
Cosmonaut Square in Olenegorsk
Path of health in Zapolyarnyj
Urban park in Kirovsk
Ecopark in the town of Kovdor
Public square and pond in the town of Snezhnogorsk
Embankment in the town of Kandalaksha
Cosmonaut Square in Olenegorsk
Path of health in Zapolyarnyj
xeno and Russian_Patriot_ like this post
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
Construction of a new airport in Gelendzhik
xeno and par far like this post
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
New garden near the towers of Yekaterinburg-City
flamming_python, xeno and Hole like this post
flamming_python- Posts : 8321
Points : 8397
Join date : 2012-01-30
Street art, graffiti, statues and murals in Vladivostok
Russian_Patriot_ likes this post
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
An abandoned park with dinosaurs in the Tula region, which was unfinished due to the coronavirus pandemic
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
Repair of an old Soviet house in Moscow
Before:
After:
Before:
After:
franco, flamming_python and par far like this post
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
Rostec City office complex in Moscow:
GarryB, medo and miketheterrible like this post
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
Simeiz Park in the Crimea after reconstruction:
GarryB and xeno like this post
miketheterrible- Posts : 7403
Points : 7377
Join date : 2016-11-06
Russian_Patriot_ wrote:Rostec City office complex in Moscow:
I never understood why Rostec didn't decide to start a technopark of its own to attract more companies that they could partially own.
Unless that's what this is
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
This is the future headquarters of Rostec. Now the construction is almost completed
x_54_u43 likes this post
PhSt
PhSt- Posts : 916
Points : 922
Join date : 2019-04-02
Russian_Patriot_ wrote:This is the future headquarters of Rostec. Now the construction is almost completed
Are those actual photos or just cgi?
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
It's actual photosPhSt wrote:Russian_Patriot_ wrote:This is the future headquarters of Rostec. Now the construction is almost completed
Are those actual photos or just cgi?
PhSt likes this post
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
AMT company will build a whole village using a 3D printer.
Resident of the Skolkovo Foundation (VEB Group.Russian Federation), AMT company, started building the village using the S-300 field construction printer. Plots of land with a total area of 1.5 hectares near Yaroslavl have already been purchased for innovative homes.
Now the first of twelve houses is being completed. According to preliminary estimates, the cost per square meter is about 20 thousand rubles. A house with a total area of 46 square meters without finishing (with a built-up area of 64 square meters) will cost 914 thousand rubles. The construction of the second house will allow you to make an accurate schedule of construction work, showing significant savings in labor costs: a cottage with an area of 100 square meters is planned to be assembled in 30 hours. The third house will demonstrate the capabilities of a construction 3D printer in terms of complex shape.
These houses already have water, electricity, and sewerage. All subsequent ones will also be connected to communications, put on cadastral registration and made hotels at the AMT training center, where they teach construction on 3D printers.
Oleg Dubnov, Vice President, Executive Director of the Skolkovo Foundation's Energy Efficient Technologies Cluster: "3D printing of buildings and structural elements is a promising topic that may soon become a trend all over the world. All industries are moving towards increasing productivity by automating processes, but in the construction sector, these changes have not yet clearly affected the main production processes. So Russian companies now have a great opportunity to take one of the leading positions due to the introduction of technologies that reduce the time and cost of building an object, which is especially important in the context of a shortage of labor resources in the construction industry."
Construction 3D printing is one of the most controversial but rapidly developing areas in the field of additive technologies. Now it is mainly used for the production of small architectural forms, landscape design and landscaping products, the production of elements and parts of buildings and structures with subsequent assembly on the construction site, as well as printing buildings directly on the foundation. It turns out to be irreplaceable in the construction of inexpensive social infrastructure facilities.
Alexander Maslov, General Director of AMT: "From a hardware point of view, a construction 3D printer is not much different from conventional molten plastic printers. These are the same CNC machines, only the building printers are larger. However, they allow you to realize any imagination of the architect: the printer does not care what to print-a simple rectangular building or a house with patterned facades, turrets and columns. And automate the process as much as possible, so that the construction time is reduced by one and a half times compared to the traditional one."
Source:
Resident of the Skolkovo Foundation (VEB Group.Russian Federation), AMT company, started building the village using the S-300 field construction printer. Plots of land with a total area of 1.5 hectares near Yaroslavl have already been purchased for innovative homes.
Now the first of twelve houses is being completed. According to preliminary estimates, the cost per square meter is about 20 thousand rubles. A house with a total area of 46 square meters without finishing (with a built-up area of 64 square meters) will cost 914 thousand rubles. The construction of the second house will allow you to make an accurate schedule of construction work, showing significant savings in labor costs: a cottage with an area of 100 square meters is planned to be assembled in 30 hours. The third house will demonstrate the capabilities of a construction 3D printer in terms of complex shape.
These houses already have water, electricity, and sewerage. All subsequent ones will also be connected to communications, put on cadastral registration and made hotels at the AMT training center, where they teach construction on 3D printers.
Oleg Dubnov, Vice President, Executive Director of the Skolkovo Foundation's Energy Efficient Technologies Cluster: "3D printing of buildings and structural elements is a promising topic that may soon become a trend all over the world. All industries are moving towards increasing productivity by automating processes, but in the construction sector, these changes have not yet clearly affected the main production processes. So Russian companies now have a great opportunity to take one of the leading positions due to the introduction of technologies that reduce the time and cost of building an object, which is especially important in the context of a shortage of labor resources in the construction industry."
Construction 3D printing is one of the most controversial but rapidly developing areas in the field of additive technologies. Now it is mainly used for the production of small architectural forms, landscape design and landscaping products, the production of elements and parts of buildings and structures with subsequent assembly on the construction site, as well as printing buildings directly on the foundation. It turns out to be irreplaceable in the construction of inexpensive social infrastructure facilities.
Alexander Maslov, General Director of AMT: "From a hardware point of view, a construction 3D printer is not much different from conventional molten plastic printers. These are the same CNC machines, only the building printers are larger. However, they allow you to realize any imagination of the architect: the printer does not care what to print-a simple rectangular building or a house with patterned facades, turrets and columns. And automate the process as much as possible, so that the construction time is reduced by one and a half times compared to the traditional one."
Source:
Rasisuki Nebia likes this post
flamming_python- Posts : 8321
Points : 8397
Join date : 2012-01-30
Kaliningrad region pre-war (Königsberg-era) buildings restoration, reconstruction and redevelopment in recent years
And to finish off, some pics from Kaliningrad and other towns of the region featuring various other recently refurbished and renovated historic buildings:
Royal Orphanage, Kaliningrad
Before
Way Before
After
Jewish Orphanage, Kaliningrad
Before
Way Before
Soon
House on 15 Krasnaya st., Kaliningrad
Before
After
Residential building with a bas-relief blowing deer, Kaliningrad
Before
After
Building at the corner of Frunze and Griga st., Kaliningrad
Before
Way Before
After
House on 57 Mir avenue, Kaliningrad
Before
Way Before
After
Wrangel Tower, Kaliningrad
Before
Way Before
Soon
Former Brewery 'Ponart', Kaliningrad
Before
Way Before
Soon
House with arch on Bagration st., Kaliningrad
Before
After
Bauhaus-style residential building, Kaliningrad
Before
Soon
House with bas-relief of woman, Kaliningrad
Before
After
Last house of Shteindamm, Kaliningrad
Before
Soon
Villa 'Honkamp', Kaliningrad
Before
Way Before
Soon
Löbenichtsehen Hospital portal, Kaliningrad
Before
Way Before
Soon
Firebrigade house, Kaliningrad
Before
Soon
Kreuz Pharmacy, Kaliningrad
Before
Way Before
After
Former German barracks, Kaliningrad
Before
Soon
King's Gate, Kaliningrad
Before
Way Before
After
Konigsberg Synagogue, Kaliningrad
Way Before
After (destroyed after Kristallnacht and rebuilt a few years ago)
Territory adjacent to the Lithuanian stream, Kaliningrad
Before
Soon
Castle Georgenburg, Mayovka
Before
Way Before
Soon
House of the artist Lovis Corinth, Gvardeisk
Before
Way Before
After
Houses in Zheleznodorozhny
Before
After
Railroad water tower, Svetloe
Before
After
Manor house in Kholmogorovka
Before
Way Before
Soon
Castle Ragnit, Neman
Before
Way Before
Soon
House of pastor Daniel Ernst Andersch, Vesyolovka
Before
After
Former trading house 'Shternfeld', Zelenogradsk
Before
Way Before
Soon
Hotel 'East Prussia', Zelenogradsk
Before
Soon
And to finish off, some pics from Kaliningrad and other towns of the region featuring various other recently refurbished and renovated historic buildings:
Kaliningrad
Zelenogradsk
Gusev
Chernyakhovsk
Sovetsk
Zheleznodorozhny
medo, xeno, Rasisuki Nebia and Russian_Patriot_ like this post
Russian_Patriot_- Posts : 1286
Points : 1300
Join date : 2021-06-08
Construction of Capital Towers in Moscow
|
|
|