Russia Defence Forum

Would you like to react to this message? Create an account in a few clicks or log in to continue.

Military Forum for Russian and Global Defence Issues


+28
Walther von Oldenburg
George1
marcellogo
kopyo-21
d_taddei2
miketheterrible
T-47
ZoA
KoTeMoRe
Cyrus the great
higurashihougi
im42
Asf
Mike E
par far
magnumcromagnon
Regular
Werewolf
Morpheus Eberhardt
flamming_python
GarryB
SWAT Pointman
KomissarBojanchev
Mr.Kalishnikov47
Mindstorm
Austin
Pugnax
Pervius
32 posters

    Ammo calibres for Russian Army rifles

    Mike E
    Mike E


    Posts : 2619
    Points : 2651
    Join date : 2014-06-19
    Location : Bay Area, CA

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  Mike E Mon Oct 20, 2014 9:38 am

    higurashihougi wrote:@Mike E: my bad, I am sorry.
    For what?
    higurashihougi
    higurashihougi


    Posts : 3000
    Points : 3087
    Join date : 2014-08-13
    Location : A small and cutie S-shaped land.

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  higurashihougi Mon Oct 20, 2014 9:39 am

    Mike E wrote:
    higurashihougi wrote:@Mike E: my bad, I am sorry.
    For what?

    For being ignorant about some of Russian the sniper rifles. I remember the wrong information.
    Mike E
    Mike E


    Posts : 2619
    Points : 2651
    Join date : 2014-06-19
    Location : Bay Area, CA

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  Mike E Mon Oct 20, 2014 9:46 am

    higurashihougi wrote:
    Mike E wrote:
    higurashihougi wrote:@Mike E: my bad, I am sorry.
    For what?

    For being ignorant about some of Russian the sniper rifles. I remember the wrong information.
    That is fine, look at the mess I created in this thread!

    GarryB (or others), do you have any new information on that new Russian 6 mm cartridge as used in the new "standard" machine-gun (or whatever it was called)? I cannot seem to find information on it anywhere, and it is rumored to have been cancelled...
    Werewolf
    Werewolf


    Posts : 5913
    Points : 6102
    Join date : 2012-10-24

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  Werewolf Mon Oct 20, 2014 10:19 am

    http://www.dogswar.ru/forum/viewtopic.php?f=23&t=283

    Maybe this will help you.
    Haven't slept since few hours so you have to use Google translator, is far to long to translate myself.
    GarryB
    GarryB


    Posts : 38689
    Points : 39185
    Join date : 2010-03-30
    Location : New Zealand

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  GarryB Mon Oct 20, 2014 11:33 am

    well to be honest I wouldn't mind sniping or support with fire by using an intermidiate cartridge IF it will have an enough of energy down the distance and will have low trajectory and from what have been wrote so far this "magic" 6.5x39 does provide so where is the real problem here ? :\

    Exactly. The down range performance of a bullet is based on its velocity and its mass.

    Unless it is a tracer round its mass does not change, but its velocity does change with distance.

    The flat based 7.62 x 39mm round has a pointed nose and a flat base, which means at supersonic speed it moves through the air efficiently, but as subsonic speed it has high drag and slows down rapidly.

    The new 6 x 49mm round has a long streamlined bullet that is rather heavy for its calibre... 140 grain is very similar to the 150 grain bullets used in the 7.62 x 54mm round. It is narrower, and also a much better aerodynamic shape so it retains speed much better than the 7.62 x 54mm round does too.

    This means that from a long sniper or machine gun barrel it will likely be travelling rather faster than the larger calibre bullet at any range from the muzzle to maximum range.

    As the bullet is only slightly lighter than means it should be moving faster and therefore hit with more energy.

    If it is moving faster it will also get there earlier, meaning less time for the target to move.

    short-range sniper rifle (not many great examples, but you get the idea)

    Selected assault rifles are often fitted with scopes and given accurate ammo and a specially trained soldier for medium range sniping... in the 200-300m range.

    True, it could be necked down without much trouble involved. Not saying that they should buy and use the .338, but rather that they should build an equivalent. This "necked down Brenneke" could be just that.

    They have already adopted the 338 LM, in one of its later more powerful forms that is effective to 1.5km.


    I'd personally like to see sniper troops being issued a standard round, and getting to choose their own rifle/built one themselves. IMHO, a sniper must be "one with the gun" for him to be the as effective as possible. Modular designs like the MSR allow snipers to be 100% fitted to their rifle.

    There was talking of the larger calibre large AK12 (ie 7.62 x 51mm) also being available in another secret calibre. If that calibre was 6 x 49mm it could be used as a DMR.

    http://www.dogswar.ru/forum/viewtopic.php?f=23&t=283

    Just get a forbidden error...

    If you go to:

    http://world.guns.ru/machine/rus/unified-caliber-machine-gun-6-mm-e.html

    To quote:

    According to the manufacturer, the 6mm Unified MG had effective range of up to 1,500 meters and was almost twice as accurate, compared to standard Kalashnikov PKM machine gun.

    Add the improvements of the PKP and it would be even more accurate...

    Would love a VS-121 in 6 x 49mm calibre.
    higurashihougi
    higurashihougi


    Posts : 3000
    Points : 3087
    Join date : 2014-08-13
    Location : A small and cutie S-shaped land.

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  higurashihougi Mon Oct 20, 2014 5:11 pm

    GarryB wrote:Would love a VS-121 in 6 x 49mm calibre.

    Would love a day that Vietnam has enough money to buy the technology for that catridge... cry cry cry

    For a long period of time I suspect that the old 7.62 x ABC catridge will still be the standard for user of Russian weaponry (outside of Russia), because more advanced ones is damn complicated.

    I tends to have a bad image of conservativeness, but, well...

    Off Topic
    Werewolf
    Werewolf


    Posts : 5913
    Points : 6102
    Join date : 2012-10-24

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  Werewolf Mon Oct 20, 2014 5:24 pm

    It is forum, someone made not a bad comment about the 6x49mm, few other comments are also worth to read.

    I only quote since, i don't like google translator and it is to long to translate.

    В конце 1980-х годов в Ижевске на производственном объединении «Ижмаш» была разработана снайперская винтовка под 6-мм винтовочный патрон с начальной скоростью пули 1150 м/с
    Стрелковое оружие явля¬ется одним из наиболее массовых образцов воен¬ной техники. При этом, отдельные конструкции в силу исторических, экономичес¬ких, политических и ряда других причин длительное время остаются на вооружении армий, ожидая каче¬ственного скачка в развитии науки и техники. Примерами могут слу¬жить магазинная винтовка Маузера 1898 г., магазинная винтовка Мо-сина обр. 1891 г., пистолет Colt М1911А1, крупнокалиберный пуле¬мёт Браунинга, автомат Калашни¬кова и др.
    Если же говорить о патронах для огнестрельного оружия, то здесь среди «долгожителей» особое место занимает русский 7,62-мм винто¬вочный патрон, который начал свой долгий путь вместе с винтовкой Мо-сина в 1891 г. Патрон прошёл все большие и малые войны XX века, и нет никаких сомнений, что и в сле¬дующем столетии он не сдаст свои позиции. Можно долго рассуждать о недостатках и достоинствах патро¬на 7,62x53, но 108 лет производства красноречивее всего говорят о его репутации. Здесь следует отметить заслуги русских конструкторов, ко¬торые сумели создать надёжные и эффективные образцы оружия под этот неудобный для конструи¬рования боеприпас.
    Принятие на снабжение армии 7,62-мм винтовочного патрона сим¬волизировало смену эпох. Оружие, стреляющее патронами крупного ка¬либра (калибр винтовки Бердана обр. 1870 г., которая стояла на воору¬жении русской армии в конце XIX века, составлял 10,67 мм), снаряжён¬ными дымным порохом, заменялось на образцы, спроектированные под патрон меньшего калибра, с новым для того времени бездымным поро¬хом. Преимущества нового патрона были неоспоримы: резко возросла начальная скорость пули; траекто¬рия полёта пули стала более на¬стильной; уменьшился вес носимого запаса патронов; устранён демаски¬рующий стрелка дым выстрела.
    Конечно, патрон имеет свои недо¬статки, доставляющие немало забот конструкторам-оружейникам. Осо¬бенно это касается выступающего фланца гильзы, большого диаметр которого приводит к увеличению размеров основных деталей стрелко¬вого оружия: ствольной коробки,
    КАЛАШНИКОВ. ОРУЖИЕ, БОЕПРИПАСЫ, СНАРЯЖЕНИЕ 5/2001
    Олин из создателей СВК - Азарий Иванович Нестеров со своим детищем
    затвора и ствола. Это, в свою оче¬редь, приводит к росту массы и габа¬ритных размеров проектируемого оружия.
    Такие патроны создают большие проблемы при отработке магазинов, так как необходимо решать задачу по устранению сцепления фланцев гильз при размещении патронов в магазине и при подаче их на ли¬нию досылания. Характерным при¬мером влияния такого патрона на конкретную конструкцию может служить магазин 8-мм француз¬ского ручного пулемёта Шоша обр. 1915 г. имеющий очень сильно изогнутый корпус, обоими концами присоединяемый к телу пулемёта.
    В 1911 г. известный русский кон¬структор-оружейник В. Г. Федоров занимался исследованием патронов калибра 6, 6,5 и 7 мм. В результате был разработан 6,5-мм винтовоч¬ный патрон длиной 81 мм, снаря¬жавшийся пулей весом 8,5 г, имев¬шей начальную скорость 860 м/с. Продолжению работ над новым па¬троном помешала начавшаяся пер¬вая мировая война.
    Гораздо позже, во второй полови¬не XX века, после войн в Корее и во Вьетнаме, в армиях ведущих стран
    Конструкция СВК обеспечивает, так называемую, «вывешенность» ствола. В илеальном случае ствол вообше не должен касаться лета^хей винтовки нигле, кроме места соединения со ствольной коробкой. В случае с газоотволом это невозможно, но конструкторам удалось исключить контакт ствола с иевьём, что положительно сказалось
    на результатах стрельбы
    мира нашли широкое применение средства индивидуальной защиты. Поэтому большое внимание стали уделять повышению пробивного действия пули, а также повышению кучности стрельбы.
    Кроме характеристик комплекса «патрон-оружие», на величину рас¬сеивания пуль большое влияние оказывают ошибки стрельбы. Среди них наиболее значимыми являются ошибки в определении дальности до цели и скорости бокового ветра. Влияние этих ошибок на точность стрельбы зависит от внешнебаллис-тических характеристик боеприпа-са — дальности прямого выстрела и времени полета пули.
    Исходя из этих соображений был разработан винтовочный патрон калибра 6 мм, начальная скорость полёта пули которого составляла 1150 м/с. Благодаря увеличению начальной скорости улучшились внешнебаллистические характеристики патрона, увеличилась вероятность поражения цели за счет более настильной траектории и уменьшения времени полёта пули.
    В рамках программы разработки снайперской винтовки под 6-мм винтовочный патрон были выдви¬нуты жесткие требования, ограни¬чивающие габариты оружия по длине. Это связывалось с необходи¬мостью оптимального размещения винтовки в отсеках боевых машин пехоты и обеспечением возможнос¬ти десантирования с оружием лич¬ного снайперов ВДВ.
    На ПО 'Ижмаш' разработкой 6-мм снайперских винтовок СВК и СВК-С (модификация винтовки со складывающимся прикладом) занималась конструкторская группа в составе А. И. Нестерова, В. Ю. Симо-ненко, А. С. Ломаева, О. Н. Кивамова.
    Согласно требованиям технического задания длина ствола винтовки (исходя из заданной начальной скорости 1150 м/с) должна была составлять 720 мм, при этом общая длина оружия ограничивалась 1225 мм.
    Первоначально под новый патрон предполагалось доработать винтовку СВД. Однако общая длина СВД (при длине ствола 620 мм) составляет 1220 мм, и при увеличении длины ствола до 720 мм она возросла бы до 1320 мм. Кроме того, компоновка механизмов автоматики, принятая в винтовке СВД, при которой за-творная рама базируется и направляется в длинной ствольной коробке, не позволяет добиться сокращения общей длины оружия за счёт уменьшения длины ствольной коробки.
    Длина оружия классической компоновки складывается из размеров приклада, ствольной коробки, ствола и пламегасителя. При компоновке оружия по схеме bull-pup ствольная коробка оказывается функ-ционально объединённой с прикладом, что даёт возможность максимально сократить его общую длину. Вместе с тем она имеет свои недостатки, среди которых можно выделить следующие:
    1) истечение части пороховых газов после выстрела из ствольной коробки в гильзоотводное окно и раздражение слизистой оболочки глаз, вызывающее слезотечение;
    2) высокое расположение прицельной линии над стволом приводит к тому, что при стрельбе лёжа и из-за укрытия противнику открывается большая часть тела стрелка.
    Существует ещё один, промежуточный вариант применения укороченной ствольной коробки. В не-мецкой самозарядной винтовке FG-42, которая была разработана во время второй мировой войны для пара-шютистов, ствол, ствольная коробка и приклад выполнены на одной линии, а магазин размещён с правой стороны ствольной коробки над рукояткой перезаряжания. Помимо увеличения ширины оружия за счёт вы-ступающего в сторону магазина, такая схема компоновки оружия, имеет ещё один, существенный для высо-коточного снайперского оружия, недостаток: изменение положения центра масс оружия в горизонтальной плоскости по мере израсходования патронов в магазине и, как следствие, ухудшение кучности стрельбы.
    Поэтому при проектировании 6-мм снайперской винтовки за основу взята классическая компоновка оружия. При этом стояла задача максимально сократить длину ствольной коробки, тем более что параметры технического задания позволяли это сделать.
    После предварительной проработки конструкции было решено остановиться на схеме автоматики с от-водом части пороховых газов из канала ствола. Варианты этой схемы наилучшим образом воплощены в проверенных временем снайперской винтовке СВД и автоматах семейства АК.
    Был выбран поворотный затвор с двумя боевыми упорами. Это позволило максимально приблизить магазин к патроннику и тем самым сократить длину ствольной коробки.
    Расположение ведущего выступа поворотного затвора в криволинейном пазе затворной рамы предпо-лагает три схемы базирования затворной рамы в оружии:
    1) в задней части затворная рама базируется в пазах, которые выполнены снаружи ствольной коробки, а в передней части под стволом, в газовой трубке (американская самозарядная винтовка Гаранда М1);
    2) в передней и задней частях затворная рама базируется на направляющих выступах внутри стволь-ной коробки (снайперская винтовка СВД);
    3) в задней части затворная рама базируется на направляющих выступах, расположенных внутри ствольной коробки, а в передней части - в газовой трубке над стволом (автомат АК).
    С точки зрения уменьшения длины ствольной коробки, из всех вышеперечисленных схем базирование затворной рамы, наиболее оптимальной является компоновка, принятая в автоматах Калашникова. Однако большая масса подвижных частей, их воздействие через газоотводную трубку на ствол в момент выстрела и некоторая неопределённость нахождения подвижных частей в переднем положении не позволяет в полной реализовать схему в высокоточном снайперском оружии.
    Поэтому была изобретена новая схема базирования затворной рамы и направления её движения. За-творная рама базируется в задней части на направляющих выступах, выполненных внутри ствольной короб-ки, а в передней части, через отверстие в ней - на направляющем стержне возвратной пружины. При этом удалось значительно сократить длину ствольной коробки.
    С целью сокращения общей длины оружия был разработан короткий щелевой пламегаситель в форме раструба, длина рабочей зоны которого составляет 29 мм (по сравнению с 78 мм на СВД).
    Для вооружения десантных войск был разработан вариант винтовки СВК-С со складывающимся при-кладом, выполненным из стальных труб. На верхней трубке приклада размещена поворотная пластмассовая опора для щеки стрелка, которая используется при стрельбе с оптическим прицелом. Приклад складывается на левую сторону ствольной коробки.
    В конструкции снайперской винтовки применены технические решения, исключающие отрицательные воздействия цевья, приклада и крышки ствольной коробки на оружие в момент выстрела и, тем самым, по-вышающие кучность стрельбы.
    Снайперская 6-мм винтовка прошла полный цикл заводских испытаний в затруднённых условиях экс-плуатации, что и подтвердило работоспособность выбранной схемы автоматики.
    В целом техническое задание на разработку 6-мм снайперской винтовки было выполнено успешно. Были достигнуты хорошие результаты по кучности стрельбы. При стрельбе на дистанцию 100 м лёжа с упо-ра с использованием оптического прицела тремя сериями по 10 выстрелов кучность стрельбы составила R100 - 5,5 см, R50 - 2,3 см (где R100 и R50 - радиусы круга, вмещающего, соответственно, 100 и 50% пробоин).
    Превосходство винтовки СВК над винтовкой СВД по частости поражения составило:
    Дальность
    стрельбы, м Превосходство по
    частости поражения
    630 1,33
    770 1,73
    970 3,89
    1030 3,89
    В среднем по всем рубежам. 2,32

    После проведения полигонных испытаний были отмечены некоторые недостатки патрона. 6-мм винто-вочный патрон нуждался в доработке, однако страна вступила в полосу затяжного экономического кризиса, резко сократилось финансирование оборонного комплекса и все работы над патроном и винтовкой были прекращены.
    Изображение
    А вот еще общеизвестный материал - выкладываем его для "разминки" и общей информации:
    6-мм «УНИФИЦИРОВАННЫЕ» АВТОМАТ И ПУЛЕМЕТ
    Изображение
    Эти две системы оружия описываются вместе, поскольку они никогда не появлялись по отдельности в российской лите¬ратуре и на выставках вооружений. Обе системы были разрабо¬таны в ЦНИИТочмаше и стали появляться на международных выставках вооружений с 1994 года, однако в 1997 году они уже нигде не были представлены, хотя информация о них до сих пор распространяется, очевидно, в попытке заинтересовать ка¬кого-либо западного производителя открыть совместное пред¬приятие по выпуску этого оружия (что крайне маловероятно). Учитывая характеристики этих двух систем, весьма схожие с ха¬рактеристиками автомата АН-94, можно предположить, что они, по всей видимости, в соревновании по программе «Аба¬кан» потерпели неудачу. До сих пор российские источники это не подтверждали; представители ЦНИИТочмаша отказались обсуждать с автором этой книги данную тему, из чего можно сделать вывод, что они больше не заинтересованы в продвиже¬нии своего оружия на рынок. Так или иначе, мы включим эти системы в книгу, поскольку они интересны для анализа путей развития российского стрелкового оружия на пороге нового ты¬сячелетия.
    Если эти системы действительно участвовали в конкурсе в Абакане, возникает вопрос, почему они были отвергнуты. Обе являются дальнейшими модификациями почтенной конструк¬ции Калашникова, что значительно упростило бы внедрение их в Российскую армию, поскольку практически не требовалось бы дополнительно переучивать солдат на новую модель. Одна¬ко эти системы добились повышения эффективности за счет использования нового, более мощного патрона. Они бы еще смогли соперничать с АН-94, если бы уменьшение отдачи бы¬ло достигнуто за счет новых системы буфера отдачи и дульного тормоза, но новый патрон к стрелковому оружию российским военным в настоящий момент совершенно не нужен. Переход от одной системы оружия к другой занимает много лет, и, если бы русские приняли на вооружение новый автомат, это еще больше запутало бы и без того сложную систему снабжения. В то же время АН-94 сделан под стандартный патрон 5,45x39 мм.
    Согласно российским рекламным проспектам, «унифициро¬ванное» оружие по своей точности превосходит оружие под бо-еприпас 7.62x59 мм по следующим пунктам:
    С руки (из положения стоя) в 5,1 раза Из положения лежа без упора в 1,5 раза Из положения лежа с упором в 2,2 раза
    Эти показатели не лучше, чем у АН-94, использующего стан¬дартный российский боеприпас. По всей видимости, термин «унифицированное» оружие означает, что автомат и пулемет сделаны под один патрон, однако это только предположение.
    Несмотря на то что конструкции и автомата, и пулемета раз¬работаны на основании уже имеющегося оружия, достоверной информации имеется очень немного. Автомат, несомненно, сделан на основе АК, и, судя по всему, в нем чувствуется вли¬яние экспериментального автомата Калашникова АЛ-7, разра¬ботанного в конце 60-х годов с целью снизить силу отдачи и увод ствола вверх при автоматической стрельбе. Конструкция оказалась удачной и даже прошла квалификационные испыта¬ния, однако так и не была запущена в серию. Сравнение АЛ-7 и «унифицированного» автомата показывает значительное внешнее сходство обоих автоматов, особенно газовой системы и компенсатора. Как это ни странно, новое оружие ЦНИИТоч¬маша выглядит более грубым, чем опытный образец АЛ-7 заво¬да «Ижмаш».
    «Унифицированный» пулемет, судя по всему, создан на ос¬нове пулемета ПК/ПКМ. Он обладает более длинным и мас¬сивным стволом. Снижение веса по сравнению с исходной мо¬делью ПК или ПКМ незначительно: опытный образец «унифи¬цированного» пулемета при весе 14,3 кг всего на 2,5 кг легче 9-килограммового ПК. В рекламных проспектах утверждается, что новый пулемет позволяет снизить на 30 процентов вес бое¬припасов, уменьшить силу отдачи, при этом боеприпасы имеют меньшие размеры. Эффективность стрельбы повышается в 2— 2,5 раза. Эти данные весьма туманны; не указывается эталон, с которым сравнивалось новое оружие, и не объясняется, как бы¬ли получены такие оценки. Так или иначе, какими бы ни были преимущества, их, похоже, оказалось недостаточно для того, чтобы принять новые системы на вооружение Российской ар-6-мм «унифицированный» пулемет.
    нв, и после того, как в 1994 году предпочтение было оконча-тельно отдано АН-94, ЦНИИТочмаш начал предлагать зару¬бежным партнерам поставки этого оружия или создание совме¬стного производства. Судя по проспектам, которые я получил от ЦНИИТочмаша в конце 1997 года, обе системы предлагают¬ся до сих пор, но теперь уже под патроны 5,45x39 мм и 5.56x45 мм. Никаких упоминаний о патроне 6x49 мм нет. На начало 1998 года заказчиков на новое оружие в модификации под. любой из трех калибров не было, и, судя по всему, оно так ? не будет запущено в серийное производство, поскольку не¬значительное повышение эффективности по сравнению с име-юшимися образцами не стоит затрат на развертывание произ-?мктвенных мощностей по его выпуску.
    ХАРАКТЕРИСТИКИ «УНИФИЦИРОВАННЫХ» АВТОМАТА И ПУЛЕМЕТА
    Ьаабр
    Принцип действия Длина
    Длина ствола Прицельная дальность Темп стрельбы
    Емкость магазина
    Прицельное устройство
    «Унифицированный» автомат
    6x49 мм отвод газов, выбор режима 940 мм « 508 мм 600 м
    в 700 выстрелов в минуту 30 патронов
    мушка; гривка с прорезью
    «Унифицированный» пулемет
    6x49 мм
    отвод газов, только автоматический огонь 1150 мм = 711 мм 1500 м
    = 700 выстрелов в минуту боепитание из ленты мушка; гривка с прорезью
    И -еще:
    Изображение
    ТКБ-0145К
    Калибр, мм 6х49
    Длина, мм 1060
    Длина ствола, мм 720
    Вес, кг 4.0
    Магазин, кол. патронов 10
    Начальная скорость пули, м/с 1150
    Эффективная дальность стрельбы, м 600

    В конце 1990-х годов конструктором Тульского ЦКИБ СОО А.Б. Адовым была разработана экспериментальная самозарядная снайперская винтовка ТКБ-0145К под патрон 6х49 мм.Винтовка ТКБ-0145К (ТКБ – Тульское Конструкторское Бюро) предназначена для уничтожения одиночных целей, в том числе защищенных бронежилетами на больших, средних и малых дальностях. Для стрельбы из винтовки применяются патроны повышенной мощности 6х49 мм, разработанные в ЦНИИТОЧМАШ под руководством старшего научного сотрудника, кандидата технических наук В.Н. Дворянинова, ранее создавшего 7,62-мм снайперский патрон к винтовке СВД. Вес 6-мм пули патрона 6х49 мм - 5 гр, начальная скорость -1150 м/с.С целью уменьшения длины оружия снайперская винтовка ТКБ-0145К выполнена по схеме «буллпап».Автоматика винтовки ТКБ-0145К основана на газоотводном принципе. Газоотводное устройство винтовки, в отличие от многих образцов автоматического оружия подобного типа, не имеет газового регулятора.В новой винтовке был применен ряд конструктивных особенностей снижающих рассеивание пуль. К ним относятся жесткое запирание канала ствола поворотным затвором с тремя боевыми упорами и отбор пороховых газов для приведения в действие автоматики от дульного среза ствола после того, как пуля покинет ствол. Последнее обосновано тем, что в обычном газоотводном оружии (например, в СВД) после прохождения пулей бокового газоотводного отверстия на оружие действует значительный импульс сил от взаимодействия пороховых газов с газоотводным устройством. Это приводит к тому, что в момент выхода пули из канала ствола оружие отклоняется от первоначального направления. Такой конструктивный недостаток устраняет дульное газоотводное устройство.За счет некоторого увеличения массы подвижных частей в ТКБ-0145К удалось добиться надежного функционирования винтовки в различных условиях.

    Коробка автоматики винтовки защищена от попадания посторонних частиц.
    Кроме открытых прицельных приспособлений винтовка оснащается оптическими прицелами ПОСП 8x42, ПСО-1 и аналогичными. Также возможна установка ночного прицела.
    Питание оружия боеприпасами осуществляется из коробчатого магазина емкостью на 10 патронов.региона, где заслужила высокие отзывы работавших с ней бойцов спецподразделений, как эффективное оружие в условиях городского боя, горной местности и противоснайперской борьбе.
    При этом используемый патрон 6х49 мм с весом пули 5 гр и начальной скоростью 1150 м/с зарекомендовал себя как боеприпас, значительно превосходящий 7,62-мм снайперский патрон. Баллистический импульс 6-мм патрона составляет 1 кгс, что примерно на 25 % меньше баллистического импульса патрона 7,62x54R винтовки СВД, соответственно и отдача винтовки ТКБ-0145К меньше, чем у СВД. Большая начальная скорость и, следовательно, малое полетное время пули до цели, меньший ветровой снос пули, а также большая настильность траектории делают винтовку ТКБ-0145К особенно эффективной (по сравнению с СВД) на больших дальностях (свыше 500 м). Дальность прямого выстрела винтовки составляет около 600 м.
    Однако, не смотря на проявленные положительные качества, самозарядная снайперская винтовка ТКБ-0145К осталась экспериментальным образцом снайперского стрелкового оружия и в производство не поступила.
    Еще более подробно об этом оружии можно почитать в статье А.Райгородецкого ( в твоей статье, Алекс!) на Сайте.
    Статья лежит тут:
    http://www.dogswar.ru/oryjeinaia-ekzotika/strelkovoe-oryjie/1523-opytnaia-snaiperskai.html
    Вот и получается, что разработали наши оружейники такой замечательный боеприпас, создали под него такие замечательные системы, а тупые военные эти системы на вооружение не приняли.
    Давайте вместе попробуем разобраться - ПОЧЕМУ?
    Так ли уж нужен был вообще пресловутый 6х49? Или это действительно, как считает Евгенич, "наш ответ Керзону", т.е. "вражескому" 6х45SAW для ручного пулемета, разрабатывавшегося в конце 70х - начале 80х. В одном из Женькиных комментариев говорится:
    "...Вообще, об унитаре 6х49 и о системах, разработанных под него много говорено, наломано копий - от жалостных воплей о тупости и костности военспецов СССР, не принявших его на вооружение, до категорических заявлений о ненужности и никчемности самой идеи о создании "усиленного промежуточного боеприпаса" взамен 5.45х39 и 7.62х54R. в противовес НАТОвскому 5.56х45 с пулями SS102 и SS109.
    Позволю себе высказать ЛИЧНОЕ мнение, и начать его с вопроса "А зачем???"
    Для винтовки, а тем более снайперской, 6мм мал категорически, для штурмового общеармейского оружия/автомата - излишне могущественнен. 5.45х39, что бы не говорили, для линейных стрелковых частей призывного типа вполне достаточен ( и сам по себе очень удачен).
    А для специальных подразделений есть старый добрых Сёмин-Елизаров 7.62х39, новые разработки, Федоровский 6.5мм унитар с проточкой и рантом.
    Да и вообще для элиты никогда особо ограничения в выборе вооружения не выставлялись, особенно для "литерных" групп..."
    "...Патрон 6Х49 мм и подобные ему - это откат к самозарядным винтовкам с возможностью автоматического огня от которого никакого толку. Если уж из АК-74 и М16 огонь ведут короткими очередями максимум на 100 м, а дальше только одиночными то, что говорить об автомате под 6Х49 отдача которого будет побольше, чем у АКМ?"
    "...Все уставы рекомендуют стрелять частыми одиночными выстрелами. И не только потому, что при автоматической стрельбе с рук даже патроном 5,45х39 отдача неприемлимо увеличивает рассеяние, но и потому, что если лупить длинными очередями, как пулеметчик, но боеприпасов не напасешься. У пулеметчика часть боекомплекта несет второй номер, и то он нагружен как китайский кули, намного тяжелее обычного пехотинца.
    Стрельба из автомата длинными очередми - это в реальном бою редкое исключение."
    "...В будущем думаю эту проблему решат за счет доведения до ума безгильзовых боеприпасов, что позволит увеличить носимый боекомплект, и реализации лафетной компоновки оружия с гашением отдачи.
    Но даже в этом случае высокую баллистику патрона я считаю необходимой - для пробивания СИБ, которые наверняка получат ещё более широкое распространение. "

    He says the 1150 m/s Velocity of the 6x49 comes from 720mm barrel shot from TKB-0145K.
    Mike E
    Mike E


    Posts : 2619
    Points : 2651
    Join date : 2014-06-19
    Location : Bay Area, CA

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  Mike E Mon Oct 20, 2014 9:57 pm

    GarryB wrote:
    short-range sniper rifle (not many great examples, but you get the idea)

    Selected assault rifles are often fitted with scopes and given accurate ammo and a specially trained soldier for medium range sniping... in the 200-300m range.

    True, it could be necked down without much trouble involved.  Not saying that they should buy and use the .338, but rather that they should build an equivalent. This "necked down Brenneke" could be just that.

    They have already adopted the 338 LM, in one of its later more powerful forms that is effective to 1.5km.


    I'd personally like to see sniper troops being issued a standard round, and getting to choose their own rifle/built one themselves. IMHO, a sniper must be "one with the gun" for him to be the as effective as possible. Modular designs like the MSR allow snipers to be 100% fitted to their rifle.

    There was talking of the larger calibre large AK12 (ie 7.62 x 51mm) also being available in another secret calibre. If that calibre was 6 x 49mm it could be used as a DMR.
    That is basically the definition of a DMR.... 

    The problem with the .338 LM is that it has to be imported, besides that it is one of the best long-distance rounds available. Producing an indigenous round would be much cheaper. 

    That would be interesting... 

    Thank you Werewolf for the added info.

    Good title!
    avatar
    im42


    Posts : 20
    Points : 26
    Join date : 2014-09-04

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  im42 Mon Oct 20, 2014 10:27 pm

    if 338 is so goood can't it be domestically made ?
    Mike E
    Mike E


    Posts : 2619
    Points : 2651
    Join date : 2014-06-19
    Location : Bay Area, CA

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  Mike E Mon Oct 20, 2014 10:40 pm

    im42 wrote:if 338 is so goood can't it be domestically made ?
    Technically yes, but I believe that it would have to be made without license. - Not "legal".
    avatar
    im42


    Posts : 20
    Points : 26
    Join date : 2014-09-04

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  im42 Mon Oct 20, 2014 10:56 pm

    Still much cheaper then new cartridge development and intiation of new production line with no potential buyers aside Russian Federation Armed Forces ;]
    GarryB
    GarryB


    Posts : 38689
    Points : 39185
    Join date : 2010-03-30
    Location : New Zealand

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  GarryB Tue Oct 21, 2014 11:24 am

    The problem with the .338 LM is that it has to be imported, besides that it is one of the best long-distance rounds available. Producing an indigenous round would be much cheaper.

    No it doesn't have to be imported... they can either buy the rights, or make their own wild cat version of it and either way produce it themselves.

    if 338 is so goood can't it be domestically made ?

    It isn't just one round... the early models were designed for 1,200m, but later rounds were effective to 1,500m. It is the latter the Russians are looking at.

    I have a photo of a cartridge board from a special company in Russia that makes exotic and specialised ammo... like underwater 5.45 x 39mm rounds and underwater 9 x 19mm rounds.

    Here is the photo:

    Ammo calibres for Russian Army rifles - Page 5 Dsc11410

    From left to right top to bottom... the first 4 rounds are 12.7 x 55mm rounds that are for the new quiet sniper rounds for use up to 600m against targets with protective vests on. The next two rounds are 9 x 19mm and 9 x 18mm armour piercing rounds. Top middle centre is a 12.7 x 108mm round (probably sniper), while the next 3 are supersonic 12.7 x 55mm rounds including armour piercing. Then the bottom two in the centre are 8.6 x 69mm which is the metric designation for the 338 LM round. The top three cartridges on the far right are 7.62 x 69mm which makes them 300 LM rounds, while the fourth round is the underwater 9 x 19mm round firing a small calibre supercavitating flechette, and the bottom two rounds are 5.45mm, but with a sabot and one being a practise under water round and the other being the standard service underwater round.
    GarryB
    GarryB


    Posts : 38689
    Points : 39185
    Join date : 2010-03-30
    Location : New Zealand

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  GarryB Tue Oct 21, 2014 11:27 am

    Check out this:

    In place of the usual "Kalashnikov" come a new generation of machines and new ammunition caliber.

    In preparation for combat equipment soldier of the future - "Warrior-2" creates a qualitatively new small arms under a brand new cartridge of a larger caliber.

    It promises a revolution in small arms. The new equipment will provide comprehensive protection for soldiers, increase their combat effectiveness. Just a set of new "Warriors" will include about 50 different elements. In addition to small arms, the soldier will be at the disposal of the targeting system, protection, electronic means of communication, navigation and targeting systems. A previous generation of equipment - "Warrior-1" is already being supplied to the troops.

    On the latest developments Russian gunsmiths said General Director of the Fund for Advanced Studies Andrei Grigoryev during the forum "Open Innovation".

    The Fund for Policy Studies was established at the initiative of Deputy Prime Minister Dmitry Rogozin. Its task: finding and accumulation of the most advanced ideas that can already be realized in the near future in the metal. And significantly increase its national defense.

    Grigoriev refuted reports that Russia is developing weapons based on new physical principles. On weapons, the effect of which would be if based on new physical principles, even when talking Serdyukov. But leading experts of the defense immediately offered not to engage in profanity terms. All "principles" on which the design of the arms have a classical basis.

    But in the making, so to speak, of conventional weapons has been a breakthrough. In particular, Grigoryev told sensational news: scientists have started work on the sixth-generation fighter, which will be made of composite materials.

    We are currently testing a fifth generation fighter T-50. A Foundation for Advanced Studies has already created a foundation for the design of the sixth-generation fighter. The works are primarily concerned with materials and motors. There is an interesting project to create a gas turbine engine with unique characteristics. Proposals on a wide use of composite materials. So that a new generation of fighter aircraft may be almost entirely plastic. Corresponding composites we have. The problem is the establishment of effective and reliable methods to control their condition. "This is a key moment for composite materials," - said Grigoriev.

    The point is that with all the obvious advantages of the composites have a significant disadvantage. With the accumulation of internal fatigue and composite structures can just explode. And we need to have time to catch a critical phase of this accumulation. If the problem can be solved, the composites in aircraft significantly will press the metal.

    Sixth-generation fighter, according to experts, may well be an unmanned aircraft, which will manage the operator in the ground or in a special plane control type known today AWACS.

    Various unmanned and unmanned combat systems, as well as a variety of robots are already in the arsenals of the army. And in the future, they will dominate. Look at the future combat robotics could be at the recent military-industrial conference specifically devoted to this topic. There have been shown and boats, robots and robotic underwater vehicles, and a variety of unmanned aerial vehicles, and tracked robots capable of conducting their own investigation and destroy enemy firing points.

    Attention is given and space issues. In particular, looking for ways to reduce the cost of the spacecraft into orbit. Fund promising research leads to the Joint Rocket-Space Corporation joint work on the formation of the list of new projects. They will focus on launching into orbit a payload on the creation of small spacecraft, which will significantly reduce the requirements for media. The key problem, according to Grigorieva, is to dramatically reduce the cost of launch spacecraft into orbit.

    Research in the field of advanced weapons systems for the period 2015-2016 years, 4.5 billion rubles laid. This year will be spent 3.3 billion.

    On average, work on projects at the Foundation for Advanced Studies lasts from two to five years. According to Grigoriev, the total cost of the projects to be launched by the end of the year - about nine billion rubles. By year end, the Fund should be in the 45 projects. A lot of money and prospects are promising.

    Source:http://www.rg.ru/2014/10/16/avtomat.html
    Werewolf
    Werewolf


    Posts : 5913
    Points : 6102
    Join date : 2012-10-24

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  Werewolf Tue Oct 21, 2014 11:54 am

    I hope for 6x49mm, sounds like a very nice calibre.
    GarryB
    GarryB


    Posts : 38689
    Points : 39185
    Join date : 2010-03-30
    Location : New Zealand

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  GarryB Wed Oct 22, 2014 9:28 am

    The only problem is that they are talking about Ratnik 2... Ratnik one is being deployed now for field testing, so it might be a couple of years before we see Ratnik 2.
    higurashihougi
    higurashihougi


    Posts : 3000
    Points : 3087
    Join date : 2014-08-13
    Location : A small and cutie S-shaped land.

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  higurashihougi Wed Oct 22, 2014 1:32 pm

    Various unmanned and unmanned combat systems, as well as a variety of robots are already in the arsenals of the army. And in the future, they will dominate. Look at the future combat robotics could be at the recent military-industrial conference specifically devoted to this topic. There have been shown and boats, robots and robotic underwater vehicles, and a variety of unmanned aerial vehicles, and tracked robots capable of conducting their own investigation and destroy enemy firing points.

    Future military hospital Very Happy

    Ammo calibres for Russian Army rifles - Page 5 JuxtapozDollHospital002-750x508
    avatar
    Cyrus the great


    Posts : 303
    Points : 311
    Join date : 2015-06-12

    Ammo calibres for Russian Army rifles - Page 5 Empty Russian 6x49mm

    Post  Cyrus the great Sat Aug 01, 2015 2:09 pm


    I have been reading on this incredible round which is apparently 2x as accurate as the 7.62x54 and 1.5 times better at maintaining its velocity... and so I want to devote a thread discussing this round.


    Is it more accurate than the 5.45 round? Does it produce less or more recoil than the 7.62x39? How effective would it be in a 14 inch barrel? How does it compare to the 6.5 Creedmoor?
    GarryB
    GarryB


    Posts : 38689
    Points : 39185
    Join date : 2010-03-30
    Location : New Zealand

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  GarryB Sun Aug 02, 2015 12:30 pm

    I can't tell you much about it... it uses a long aerodynamic projectile that retains velocity better than the 7.62 x 54mm round so it gets to the target faster, which means flatter trajectory and more energy on target at longer range.

    Here is info about the unified MG:

    http://world.guns.ru/machine/rus/unified-caliber-machine-gun-6-mm-e.html

    Including a photo of the round between a 5.45mm round and the 7.62 x 54mm round.
    KoTeMoRe
    KoTeMoRe


    Posts : 4212
    Points : 4227
    Join date : 2015-04-21
    Location : Krankhaus Central.

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  KoTeMoRe Sun Aug 02, 2015 2:15 pm

    Here's what you need to know:

    It. Costs. Too. Much.

    That's the issue with all the evolutions...It would probably have punched a meteor sized hole in the Soviet budget. And even today would have to be exported in biblical amounts with the ad hoc "tools" to make the change worthy. The round was axed because of its cost, and since then only ONE nation has gone out of the current 5.56/5.45 dichotomy and that's China with it's 5.8x42 DAP/DBP which is just another ".22x round".

    Changing calibre needs a phenomenal amount of time and cost, something the Soviets did not want (couldn't?) disburse.

    It's not what you wanted to hear and I apologize for the tone, but that's exactly how these things are going to look like for while with all the ammunition talks.
    Werewolf
    Werewolf


    Posts : 5913
    Points : 6102
    Join date : 2012-10-24

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  Werewolf Sun Aug 02, 2015 2:40 pm

    KoTeMoRe wrote:Here's what you need to know:

    It. Costs. Too. Much.

    That's the issue with all the evolutions...It would probably have punched a meteor sized hole in the Soviet budget. And even today would have to be exported in biblical amounts with the ad hoc "tools" to make the change worthy. The round was axed because of its cost, and since then only ONE nation has gone out of the current 5.56/5.45 dichotomy and that's China with it's 5.8x42 DAP/DBP which is just another ".22x round".

    Changing calibre needs a phenomenal amount of time and cost, something the Soviets did not want (couldn't?) disburse.

    It's not what you wanted to hear and I apologize for the tone, but that's exactly how these things are going to look like for while with all the ammunition talks.

    The problem with the costs is that they could not bear it for export, since no other country would be willing to scrap all their 7.62x39/45mm calibres to change to that, that would ruine them and SU had already hundreds of millions of rifles that had those calibres and physically it would not had any impact in performance high enough to justify such a tremendous budget. We are talking here about a budget that would be higher than several new tank divisions and a long term decapitation of forces being capable and combat ready due the costs to re-establish a supply chain and manufactoring for this new round, but i admit seems like a great calibre.
    magnumcromagnon
    magnumcromagnon


    Posts : 8138
    Points : 8273
    Join date : 2013-12-05
    Location : Pindos ave., Pindosville, Pindosylvania, Pindostan

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  magnumcromagnon Sun Aug 02, 2015 8:30 pm

    Werewolf wrote:
    KoTeMoRe wrote:Here's what you need to know:

    It. Costs. Too. Much.

    That's the issue with all the evolutions...It would probably have punched a meteor sized hole in the Soviet budget. And even today would have to be exported in biblical amounts with the ad hoc "tools" to make the change worthy. The round was axed because of its cost, and since then only ONE nation has gone out of the current 5.56/5.45 dichotomy and that's China with it's 5.8x42 DAP/DBP which is just another ".22x round".

    Changing calibre needs a phenomenal amount of time and cost, something the Soviets did not want (couldn't?) disburse.

    It's not what you wanted to hear and I apologize for the tone, but that's exactly how these things are going to look like for while with all the ammunition talks.

    The problem with the costs is that they could not bear it for export, since no other country would be willing to scrap all their 7.62x39/45mm calibres to change to that, that would ruine them and SU had already hundreds of millions of rifles that had those calibres and physically it would not had any impact in performance high enough to justify such a tremendous budget. We are talking here about a budget that would be higher than several new tank divisions and a long term decapitation of forces being capable and combat ready due the costs to re-establish a supply chain and manufactoring for this new round, but i admit seems like a great calibre.

    Theoretically speaking, the 7.62 x 54R has more propellant for energy , couldn't they just take the new projectile and place it in the 7.62 x 54R propellant case?...Wouldn't that just be a better solution than introducing a new round? I know, it's more complicated than that but still...
    Werewolf
    Werewolf


    Posts : 5913
    Points : 6102
    Join date : 2012-10-24

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  Werewolf Sun Aug 02, 2015 8:46 pm

    magnumcromagnon wrote:
    Werewolf wrote:
    KoTeMoRe wrote:Here's what you need to know:

    It. Costs. Too. Much.

    That's the issue with all the evolutions...It would probably have punched a meteor sized hole in the Soviet budget. And even today would have to be exported in biblical amounts with the ad hoc "tools" to make the change worthy. The round was axed because of its cost, and since then only ONE nation has gone out of the current 5.56/5.45 dichotomy and that's China with it's 5.8x42 DAP/DBP which is just another ".22x round".

    Changing calibre needs a phenomenal amount of time and cost, something the Soviets did not want (couldn't?) disburse.

    It's not what you wanted to hear and I apologize for the tone, but that's exactly how these things are going to look like for while with all the ammunition talks.

    The problem with the costs is that they could not bear it for export, since no other country would be willing to scrap all their 7.62x39/45mm calibres to change to that, that would ruine them and SU had already hundreds of millions of rifles that had those calibres and physically it would not had any impact in performance high enough to justify such a tremendous budget. We are talking here about a budget that would be higher than several new tank divisions and a long term decapitation of forces being capable and combat ready due the costs to re-establish a supply chain and manufactoring for this new round, but i admit seems like a great calibre.

    Theoretically speaking, the 7.62 x 54R has more propellant for energy , couldn't they just take the new projectile and place it in the 7.62 x 54R propellant case?...Wouldn't that just be a better solution than introducing a new round? I know, it's more complicated than that but still...

    What is important for projectiles is the ratio between propellant and calibre,length of projectile and the velocity it reaches. The 6x49mm already reached over 1100 m/s that is tremendous, any higher speed would have an effect on trajectory and maybe even disfavorable. Most high velocity rounds tend to be made very narrow or even close to Sabot like shaped projectiles. The propellant of a 54mm would be probably far to much and wasteful of resources, not just propellant and extra bress for casings, but the barrel would suffer and lower its durability if not even tend to have overpressure for that calibre. They would of course not use the same barrel as 7.62x54mmR PKM, but had to adjust it to 6mm meaning less material and thickness of the barrel which would have an effect on durability and making extra thick or making any other kind of measures to assure the barrel survives for an acceptable quantity of fired rounds will increase costs and would need modernisation of such weapons, further you would only make problems. The 6x49mm was designed to replace both 7.62x39 and 7.62x54mmR not just one. There was realistically speaking no future for this round in an already established MIC that has already issued so many rifles in existing cartridges and further majority of the world used either 7.62x39mm or 7.62x54mm R cartridges and they had no chances to adopt to it, that would leave Russia to rely domestically on 6x49mm while exporting 7.62x36/54mm R rounds. It was just unfeasible, unfortunatley... I have grown a fan of this calibre from what i could read.
    KoTeMoRe
    KoTeMoRe


    Posts : 4212
    Points : 4227
    Join date : 2015-04-21
    Location : Krankhaus Central.

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  KoTeMoRe Sun Aug 02, 2015 9:08 pm

    Werewolf wrote:
    KoTeMoRe wrote:Here's what you need to know:

    It. Costs. Too. Much.

    That's the issue with all the evolutions...It would probably have punched a meteor sized hole in the Soviet budget. And even today would have to be exported in biblical amounts with the ad hoc "tools" to make the change worthy. The round was axed because of its cost, and since then only ONE nation has gone out of the current 5.56/5.45 dichotomy and that's China with it's 5.8x42 DAP/DBP which is just another ".22x round".

    Changing calibre needs a phenomenal amount of time and cost, something the Soviets did not want (couldn't?) disburse.

    It's not what you wanted to hear and I apologize for the tone, but that's exactly how these things are going to look like for while with all the ammunition talks.

    The problem with the costs is that they could not bear it for export, since no other country would be willing to scrap all their 7.62x39/45mm calibres to change to that, that would ruine them and SU had already hundreds of millions of rifles that had those calibres and physically it would not had any impact in performance high enough to justify such a tremendous budget. We are talking here about a budget that would be higher than several new tank divisions and a long term decapitation of forces being capable and combat ready due the costs to re-establish a supply chain and manufactoring for this new round, but i admit seems like a great calibre.

    Exactly the point... the AK on its 7.62 format was a killer sale (pun intended). The rifle was cheap, the round cheap and powerful, every thing was nice. With another round you'd have to retool your forces, then start pushing it for export. In a cold war setup when the USSR was litterally giving away thousands of rifles that was self defeating. Now however it could be very interesting to have that round for export until it pays for the Russian armed forces (at least as a validating test).
    magnumcromagnon
    magnumcromagnon


    Posts : 8138
    Points : 8273
    Join date : 2013-12-05
    Location : Pindos ave., Pindosville, Pindosylvania, Pindostan

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  magnumcromagnon Mon Aug 03, 2015 7:31 am

    So I'm guessing that the 6x49mm will remain a Special Forces/Black Ops ammo type, but not a conscript's daily bread?
    GarryB
    GarryB


    Posts : 38689
    Points : 39185
    Join date : 2010-03-30
    Location : New Zealand

    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  GarryB Mon Aug 03, 2015 2:39 pm

    Errmm Bollocks.

    There is a cost associated with introducing a new calibre, but when you are buying armata based tank divisions where every vehicle is a tank based vehicle the fuel bill alone... and a fifth gen fighter is not cheap either.

    The fact is that the 6 x 49mm would be cheaper to produce than the 7.62 x 54mm in time... they have already introduced a range of new calibres into their armoury... they introduced teh 338 Lapua Magnum round, they are introducing a new 12.7 x 55mm catridge, and they are developing and producing new sniper ammo in a range of calibres including 12.7 x 108mm.

    They are already looking at replacing their AKs with either the AK12 or AEK or both... so now is actually the perfect time to introduce a new calibre that will stack better in magazines and can be pushed through a metal link belt instead of having to be withdrawn and then pushed into the chamber like on the PK and PKP.

    The purpose behind the new round is all about retaining energy rather than just blowing it out the muzzle of the rifle faster.

    You would get much better velocities and retention of velocity with flechettes but you lose lethality and effect on target.

    They have already been down that path:

    Ammo calibres for Russian Army rifles - Page 5 12773810

    From what I have read the 6 x 49mm was never intended as a replacement for the 5.45mm round, which is intended as a long range SMG cartridge. The 6x49mm round is specifically to replace the old 7.62 x 54mm round with a modern rimless cartridge that has a longer effective range, is lighter and more compact, and more accurate.

    All they have to do is produce the SVD, VS-121, PKP, PKM, and SV-98 in the new cartridge and start producing it.

    If they can't afford to produce it, how can they afford to produce the 6.5mm grendel they are planning to make civilian rifles in?

    there was talk of their next generation weapon family being multi calibre... so it would just be a case of the right chamber, the right barrel and the right mag feed/mag design.

    The West germans couldn't afford to produce a new caseless round for their G11, but that was a rather different situation all together.

    Sponsored content


    Ammo calibres for Russian Army rifles - Page 5 Empty Re: Ammo calibres for Russian Army rifles

    Post  Sponsored content


      Current date/time is Tue Mar 19, 2024 6:07 am